You’re leaving www.pravana.com
30g Pure Light Ultra Lightener + 60g 10 Volume Creme Developer
20g ChromaSilk Creme Color – Copper 7.40 Bright Copper Blonde + 20g ChromaSilk Creme Color – Vibrant Reds 6.64 Dark Red Copper Blonde + 60g 10 Volume Creme Developer
Formula 1: 30g ChromaSilk VIVIDS Original Orange
Formula 2: 30g ChromaSilk VIVIDS Original Yellow
Formula 3: 21g ChromaSilk VIVIDS Original Silver + 5g ChromaSilk VIVIDS Original Emerald + 1g ChromaSilk VIVIDS Original Black + 1g ChromaSilk VIVIDS Original Yellow
Section out the perimeter of the hairline about 2 inches in depth. Then divide the hair left on top into four quadrants to create a working guide.
Using a Global Blonding method, apply the Lightening Formula to the perimeter taking 1/8” sections.
It is important to take thin sections that you can “read a newspaper through” and saturate well for even global blonding results.
While the lightener processes, apply the Base Color Formula to the roots first, then apply the same formula to the mid-lengths and ends.
Apply foils or meche sheets over the perimeter lightener to create a barrier while you apply the Color Formula to the top.
Process 30 minutes at room temperature checking the lightener every 5-10 minutes until you have reached a Level 9 Light Yellow. Shampoo the hair with Color Protect Cleanse and apply Silk Degrees Prep and Treat for 5 minutes to equalize the porosity after lightening and for more longevity of the VIVIDS application. Rinse and dry the hair completely.
Section out the lightened perimeter and apply the ChromaSIlk VIVIDS Formulas to the first side of the head—Formula 1 closest to the face, then Formula 2 to the middle and then Formula 3 in the back in equal size sections. Mirror on the other side.
For even saturation when applying VIVIDS direct dyes, make sure to reload your brush every 3 inches and apply generously with a side-to-side motion as well as an up and down motion. We call this the “3-inch Rule”.
Process 30 minutes at room temperature. Rinse with cold water with high water pressure until the water runs clear. Apply Color Protect Condition to all of the hair and rinse. Style as desired.