Lightening30g Pure Light Ultra Lightener + 60g 20 Volume Creme Developer
Toning60g ChromaSilk Express Tones Violet + 90g Zero Lift Creme Developer
ColorFormula A: ChromaSilk VIVIDS 60g Magenta + 8g Violet
Formula B: ChromaSilk VIVIDS 90g Clear-Dilute
Formula C: ChromaSilk VIVIDS 30g Sunstone + 30g Neon Orange + 4g Magenta
PrepTo diminish minerals, spray Purify & Revive PRIME generously, comb through, and allow to sit for 3 minutes while you mix your lightener (no rinsing or shampoo required).
SectionDivide the hair into 4 quadrants to create a working guide.
Step 1: Global Blonding RetouchStarting in the nape area, take thin 1/8” partings and apply the Lightening Formula to the new regrowth with a light tapping motion to avoid overlapping the previously lightened hair.
Then, lift up your section and apply to the other side to ensure full saturation.
Pro TipFor a virgin application or for regrowth longer than ½”, apply ½” away from the scalp through the ends or through the line of demarcation processing to 80% of your desired level, then apply on scalp.
Step 2: ProcessProcess at room temperature checking every 5-10 minutes up to a maximum of 55 minutes until you achieve a Level 9 where you only see yellow pigment remaining.
Shampoo and towel dry thoroughly.
Do not condition prior to toning.
Pro TipSee the recommended level of lift circled on the top of each ChromaSilk VIVIDS box.
Step 3: ToningOn well towel-dried hair, apply the Toning formula to the root area dragging it down 3” and process 10 minutes at room temperature.
Then, apply the Toning formula to the mid-lengths and ends processing an additional 3 minutes.
Rinse, shampoo lightly and dry the hair 100%.
Pro Tip“Tone to Set the Tone” – leaving the Toning Formula longer on the base sets a violet tone for the purple stretch root, pulling it through the mids/ends for 5 minutes or less neutralizes any residual yellow warmth.
Step 4: VIVIDS ApplicationApply Color Formula A to the base dragging it down 3”.
Pro TipApply ChromaSilk VIVIDS generously using a side-to-side motion reloading your brush every 3 inches for the most vibrant and even coverage.
Step 5: VIVIDS ApplicationApply Color Formula B to the next 3” mid-section to create “Negative Space” between the two fashion shades.
Pro Tip“Negative Space” keeps two VIVIDS shades from blending into each other and allows the blonde hair to show through.
Step 6: VIVIDS ApplicationApply Color Formula C to the remaining 3” through the ends.
Process all 30 minutes at room temperature.
Pro TipBlend the transition areas lightly between your index and middle fingers for a seamless transition.
Step 7: Rinse and ConditionRinse with cool water until the water runs clear and condition with PRAVANA’s Color Protect Condition.
Detangle with Intense Therapy Leave-In Treatment, emulsify Polish & Reunite in your hands and apply to the hair combing through for even distribution, and style.